Menu
Explore a research direction
Materials science
research labs.
Explore labs that list materials science among their research interests, including work on the structure, synthesis and properties of new materials. Each profile links to its official sources so you can check what a group actually studies before you decide whom to contact.
What to compare
When comparing groups in materials science, look at synthesis and characterization methods, access to instruments and cleanrooms, and how fundamental findings reach applications. Ask how a new researcher would be involved and what preparation is expected.
Profiles appear here because their listed research keywords match this topic. Inclusion does not establish an open position. Check the official sources and any published application instructions before reaching out.
Prepare a research introduction ↗54 research-led lab profiles
Browse labs by their listed college affiliationAlex K. Shalek Research Group
Massachusetts Institute of TechnologyAlex K. Shalek · Professor in the Institute for Medical Engineering and Science and the Department of Chemistry
How can new approaches elucidate cellular and molecular features that inform tissue-level function and dysfunction across human health and disease? Alex Shalek is a professor in the Institute for Medical Engineering and Science and the Department of Chemistry. The lab couples genomics, chemical biology, and nanotechnology to establish cross-disciplinary platforms for profiling and controlling cells. Applications focus on the roles of cellular heterogeneity and cell-to-cell communication in immune responses within tissues. Studies examine how host cell-pathogen interactions evolve across time and tissues during pathogenic infection. Other studies examine how tumor cells evade homeostatic immune activity.
Ali Javey Research Group
University of California, BerkeleyAli Javey · Professor
How can nanoscale electronic materials be integrated for new technological applications? Ali Javey is a professor of Electrical Engineering and Computer Sciences at the University of California, Berkeley and a Co-Director of the Berkeley Sensor & Actuator Center. His work focuses on novel nano-electronics, flexible circuits and sensors, and energy generation and harvesting. He is also a faculty scientist at the Lawrence Berkeley National Laboratory, where he serves as the program leader of Electronic Materials. His research interests encompass the fields of chemistry, materials science and electrical engineering.
Andrew Herring Research Group
Colorado School of MinesAndrew Herring · Professor
Andrew Herring’s research works at the boundary between materials science and chemical engineering to address renewable energy and sustainability. The group organizes its work around polymer electrolyte membranes and devices, together with electrochemical engineering. These directions connect the properties of functional materials with the behavior of energy-related systems. Collaborative research includes work with national laboratories in renewable energy and materials science. For researchers interested in electrochemistry, the program links material selection and membrane behavior with the practical challenge of designing devices for more sustainable energy technologies.
Angela M. Belcher Research Group
Massachusetts Institute of TechnologyAngela M. Belcher · James Mason Crafts Professor
Can engineered viruses and microbes be evolved to assemble functional inorganic–organic nanomaterials for energy, environmental, and medical devices? The Biomolecular Materials Group engineers M13 bacteriophage and other organisms to produce hybrid electronic, magnetic, and catalytic materials used in solar cells, batteries, and diagnostics. They apply directed evolution and biomolecular design to program organisms to nucleate and assemble inorganic components into precisely self-assembled nanostructures. This biologically driven self-assembly leverages non-toxic materials, self-repair, and long-range order to create scalable materials and devices. Ongoing work includes developing biologically enhanced batteries and improved photovoltaics by integrating virus-templated nanostructures into electrodes and active layers.
Arend M. van der Zande Research Group
University of Illinois at Urbana-ChampaignArend M. van der Zande · Associate Professor
How can nanomaterials serve as building blocks to engineer new classes of devices? Arend van der Zande runs an interdisciplinary research group at the nexus of nanotechnology, mechanics, and material physics. The research efforts have centered on two-dimensional (2D) materials, which are stable as monolayers one or a few atoms thick. The work spans discovering new synthesis and atomically precise fabrication techniques for manufacturing devices from nanomaterials. He earned a Ph.D. in Physics from Cornell University in 2011.
Benjamin S. Hsiao Research Group
Stony Brook UniversityBenjamin S. Hsiao · Distinguished Professor
Water purification can depend on the architecture of a material at very small scales. Hsiao studies polymers and nanostructured materials, investigating how preparation and processing influence their structure. His group develops nanofibrous membranes for removing pathogens and contaminants from water, including approaches that use gravity or solar heat. Broader research considers fibers, films, and bulk soft materials, with applications in water and energy. These projects connect polymer structure and manufacturing with efforts to develop accessible, sustainable methods for supplying cleaner water.
Biomedical Microdevices and Nanotechnology Lab
University of Texas at DallasShalini Prasad · Professor
What if a useful diagnostic measurement could come from a small device rather than a large laboratory instrument? Prasad researches nanomaterials and miniature biosensors for portable molecular and cellular measurements. Her Biomedical Microdevices and Nanotechnology Lab connects device engineering with questions in cancer, neurological disease, and cardiovascular health. Work listed by UT Dallas includes wearable sensing of inflammatory and metabolic signals in sweat and breath. The research combines materials, biological recognition, and measurement design to investigate more accessible testing; experimental sensors should not be confused with established clinical diagnoses.
Carlo U. Segre Research Group
Illinois Institute of TechnologyCarlo U. Segre · Professor of Physics
What does research on the structure and electronic properties of complex materials involve? Carlo U. Segre is the Duchossois Leadership Professor and Professor of Physics. The materials studied include superconducting, magnetic, catalytic, and energy storage materials. Specific topics include structural and electrochemical properties of advanced battery materials and in-situ structural studies of catalytic materials for use in fuel cells. He is also Director of the Center for Synchrotron Radiation Research and Instrumentation.
Chad A. Mirkin Research Group
Northwestern UniversityChad A. Mirkin · Professor
How can DNA-programmed nanoparticle assembly be used to control materials architecture at the nanoscale for sensing and medicine? The Mirkin Group engineers DNA-directed colloidal crystal assembly and spherical nucleic acids to create nanostructured materials for sensing, gene regulation, and nanomedicine. Researchers develop nanoparticle megalibraries and nanocombinatorial chemistry to accelerate discovery of catalysts, optoelectronic, and functional materials. The group applies DNA bonds and shape-complementary particle design to produce space-tiled colloidal crystals and programmable superlattices. Mirkin’s team translates these nanomaterials into analytical tools and vaccine and therapeutic platforms using structural nanomedicine approaches.
Claussen Research Group
Iowa State UniversityJonathan Claussen · Professor of Mechanical Engineering
Could a sensor monitor a crop or water supply where the problem actually occurs? Jonathan Claussen develops sensors and nanotechnology for agriculture and environmental monitoring, including printed electronics, plant-based wearables, probe sensors, and lab-on-a-drone platforms. Applications include nutrient and fertilizer detection, pesticide spray monitoring, pathogen identification, and water-quality assessment. His broader research investigates carbon nanomaterials and interfaces with biological agents. The work connects materials, fabrication, and biosensing around practical measurements outside conventional laboratory settings.
David Carroll Research Group
Wake Forest UniversityDavid Carroll · Professor
Carroll investigates how dimension, topology, and symmetry shape the behavior of quantum materials. His group studies low-dimensional condensed-matter systems and explores quantum-computing architectures, including topologically stabilized qubits and neuromorphic approaches. A September 2026 Wake Forest report describes his leadership of the NanoteQ research effort and work toward silicon-based qubits and processors that operate at room temperature. These are research directions rather than a promise of a finished computing product. The appeal is a close connection between fundamental materials physics and the design of possible future quantum information technologies.
David G. Cahill Research Group
University of Illinois at Urbana-ChampaignDavid G. Cahill · Grainger Distinguished Chair in Engineering and Professor of Materials Science and Engineering
How does heat move through materials at the nanoscale? David Cahill's research program studies extremes of low and high thermal conductivity in hard and soft materials. It also covers the thermal science of magnetic materials and physical insights on thermal transport at the nanoscale. The program examines the coupled transport of heat and mass in battery materials. He holds courtesy appointments in the Department of Mechanical Sciences and Engineering and the Department of Physics.
De-en Jiang Research Group
Vanderbilt UniversityDe-en Jiang · Professor of Chemical and Biomolecular Engineering
How can computational chemical science enable data-driven design of functional materials and molecules for a sustainable society? De-en Jiang is a Professor of Chemical and Biomolecular Engineering and a Professor of Chemistry. The research group focuses on computational chemical science and materials. Current projects include computational nanocatalysis for CO2 conversion and molecular simulations of chemical separations for carbon capture and critical materials. Other projects cover materials design for advanced batteries and organic-inorganic interfaces, and data-driven machine learning discovery of functional ligands and materials.
Deji Akinwande Research Group
University of Texas at AustinDeji Akinwande · Professor
Can atomically thin materials enable ultra-low-power wearable sensing and memory devices for continuous health monitoring? The group demonstrated continuous cuffless monitoring using graphene bioimpedance tattoos for arterial blood pressure measurement. Researchers develop nonvolatile resistance switching devices called Atomristors in transition metal dichalcogenide atomic sheets to provide atomic-scale memory. The lab reported the first silicene field-effect transistors operating at room temperature to explore new two-dimensional semiconductor device platforms. The team advances flexible graphene-based electronics and wearable sensors, including a clinically accurate wearable blood pressure monitor and graphene electronic tattoo sensors.
Emmanuel P. Giannelis Research Group
Cornell UniversityEmmanuel P. Giannelis · Walter R. Read Professor of Engineering, Department of Materials Science and Engineering
How can nanomaterials be designed for energy, biomedical, and environmental applications? Emmanuel P. Giannelis is the Walter R. Read Professor of Engineering in the Department of Materials Science and Engineering. His group's research focuses on energy production, conversion, and storage. One theme is the design and synthesis of nanoparticles that self-assemble at interfaces and control the properties of emulsions and foams. Another theme is the development of high surface area porous materials, including porous carbons, as sorbents and catalyst supports.
Gregory Hartland Research Group
University of Notre DameGregory Hartland · Notre Dame Collegiate Professor
How can optics be used to examine the properties of nanomaterials? Research in the Hartland group is focused on using optics to examine the properties of nanomaterials and how these materials interact with their environments. Almost all of the projects in the group involve single particle studies. Processes studied include the propagation of surface plasmon polaritons in metal nanostructures and charge carrier trapping and diffusion in semiconductor nanowires. Further examples are chemical reactions in nanomaterials and the effects of viscosity at the nanoscale.
Haotian Wang Research Group
Rice UniversityHaotian Wang · Professor, Chemical and Biomolecular Engineering
How can novel nanomaterials and electrolysis systems address energy and environmental challenges? Haotian Wang is a professor in the Department of Chemical and Biomolecular Engineering at Rice University. The group develops work in carbon capture and utilization, chemical and fuel generation, critical materials recovery and water treatment. The Wang Group develops advanced catalysts, nanomaterials, and electrochemical reactors and systems. The group combines fundamental studies of catalysis with scalable reactor and materials design.
Hong Yang Research Group
University of Illinois at Urbana-ChampaignHong Yang · Professor of Chemical Engineering
How can nanostructures be designed for energy and biological applications? Hong Yang holds the Alkire Chair as a Professor of Chemical Engineering. He is particularly interested in the design and synthesis of nanostructures, which are evaluated for a range of catalytic applications. These applications include hydrogen fuel cell, water splitting, and biomass conversion. His listed research interests are nanomaterials for energy and biotechnology, and electrocatalysis, as shown under Research Interests.
Huanyu Cheng Research Group
Penn State (Main campus)Huanyu Cheng · Associate Professor of Engineering Science and Mechanics
How can standalone stretchable device platforms be designed and fabricated for wearable and transient applications? The research group focuses on design, fabrication, and application of standalone stretchable device platforms. Projects include development of stretchable sensors, transient electronics, and graphene-based membranes for sensing and energy applications. Methods combine laser-induced graphene, thin-film processing, and materials-by-design strategies to achieve stretchability, bioresorbability, and wireless integration. Work tests devices in physiological sensing and environmental-energy contexts to validate performance and functionality.
Jiang Research Lab
University of Illinois ChicagoNan Jiang · Professor
How can researchers observe chemical behavior at the scale of individual molecules and atoms? The group develops scanning-probe approaches for designing and investigating nanomaterials. A hybrid analytical technique combines nanoscale imaging with spectroscopy to obtain both surface structure and chemical information. Research examines charge transfer, electron localization, light absorption and light emission at very small length scales. The work aims to follow chemical systems dynamically at the single-molecule level and visualize electronic and vibrational behavior within molecules, connecting instrumental development with fundamental surface science.
Jin Zhong Zhang Research Group
University of California, Santa CruzJin Zhong Zhang · Distinguished Professor and Chair
How can engineered nanomaterials enable faster charge dynamics and novel optical or catalytic functions for energy and sensing applications? The Zhang Research Group synthesizes semiconductor and metal nanocrystals, quantum dots, and magic-sized clusters using inorganic colloidal chemistry methods to probe ultrafast carrier and spin dynamics. Researchers employ femtosecond laser spectroscopy, SERS, XAFS/XPS and microscopy to characterize exciton, spin, and charge relaxation processes in doped and undoped nanomaterials. The group develops perovskite and metal-halide nanostructures and studies circularly polarized luminescence and chiral coordination to advance LEDs, photocatalysis, and sensing. They investigate photoelectrochemical water splitting and hydrogen generation using novel nanowires and oxide nanostructures.
John A. Rogers Research Group
Northwestern UniversityJohn A. Rogers · Professor
Can soft, bio-integrated electronic systems provide clinically useful, conformal interfaces to biological tissues for sensing and therapy? The Rogers Group develops bio-integrated microsystems—flexible, stretchable, and bioresorbable electronics—for neonatal monitoring, implantable optoelectronic neuromodulation, and temporary cardiac pacemaking. Researchers design epidermal microfluidic and sensor platforms for real-time chemical and physiological monitoring of sweat and transcutaneous gaseous flux. The group engineers injectable, cellular-scale optoelectronic filaments and multifunctional 3D mesostructures to interface with organoids and neural tissues for measurement and modulation. Work combines novel materials, mechanics-driven self-assembly, and micro/nanofabrication to enable soft lithographic and bioresorbable device platforms.
Junqiao Wu Research Group
University of California, BerkeleyJunqiao Wu · Professor of Materials Science and Engineering
How do strongly correlated electron materials and semiconductors with reduced dimensions behave at the nanoscale? Junqiao Wu leads a research group in the Department of Materials Science and Engineering at the University of California, Berkeley, and currently serves as chair of the department. The group explores phase transitions at the nanoscale. It also studies the optoelectronic, thermal and thermoelectric properties of semiconductor alloys and interfaces. Wu also holds appointments in the Applied Science and Technology Graduate Program and in the Materials Sciences Division at the Lawrence Berkeley National Laboratory.
Ken Schweizer Research Group
University of Illinois at Urbana-ChampaignKen Schweizer · Professor of Materials Science and Engineering
How do polymers, colloids and other soft materials behave at the molecular scale? Ken Schweizer is the Morris Professor of Materials Science and Engineering at UIUC. He joined the UIUC faculty in 1991, according to his profile. He is an expert in predictive statistical mechanical theories of soft materials such as polymers, colloids, nanocomposites and complex fluids. He is also a Professor of Chemistry and a Professor of Chemical and Biomolecular Engineering.
Showing 1–24 of 54 labs