Menu
Explore a research direction
Energy and sustainability
research labs.
Explore labs that list energy and sustainability among their research interests, including work on how energy is produced, stored and used more sustainably. Each profile links to its official sources so you can check what a group actually studies before you decide whom to contact.
What to compare
When comparing groups in energy and sustainability, look at whether the work targets devices, grids or policy, and what pathways exist from research results to deployment. Ask how a new researcher would be involved and what preparation is expected.
Profiles appear here because their listed research keywords match this topic. Inclusion does not establish an open position. Check the official sources and any published application instructions before reaching out.
Prepare a research introduction ↗38 research-led lab profiles
Browse labs by their listed college affiliationNitin Padture Research Group
Brown UniversityNitin Padture · Otis Everett Randall University Professor of Engineering
Which materials advances can support renewable energy and energy efficiency, from solar cells and modules to gas-turbine engines for aircraft propulsion? Nitin Padture, the Otis Everett Randall University Professor of Engineering, is Director of the Initiative for Sustainable Energy (ISE) at Brown. His research interests include halide perovskite solar cells and modules. They also include tailoring high-temperature advanced structural ceramics, composites, and coatings. The ceramics work is aimed at high-efficiency, fuel-flexible gas-turbine engines for electricity generation and aircraft propulsion.
Paul Kohl Research Group
Georgia Institute of TechnologyPaul Kohl · Regents' Professor
How can new materials and processes improve advanced interconnects for integrated circuits? Paul Kohl's research interests include energy conversion and storage devices including lithium ion batteries and alkaline fuel cells. The Kohl group has developed new materials and processes for embedding air-isolation in electronic and optical devices. Room temperature ionic liquids provide high conductivity, wide electrochemical stability, and zero vapor pressure. The group is researching the use of anions as the conducting species in fuel cells.
Rakesh Agrawal Research Group
Purdue University West LafayetteRakesh Agrawal · Stone Distinguished Professor of Chemical Engineering
What work does the Rakesh Agrawal Research Group at Purdue's Davidson School of Chemical Engineering report on chalcogenide perovskites and thin film photovoltaics? Its news lists a generalized framework for fabrication of BaMS3 (M=Ti, Zr, Hf) chalcogenide perovskite materials. Other news items cite papers on the viability of photovoltaics on agricultural land and on rethinking tolerance factor analysis for chalcogenide perovskites. A feature article on solution processed metal chalcogenide semiconductors for inorganic thin film photovoltaics is also listed. Rakesh Agrawal is the Winthrop E. Stone Distinguished Professor of Chemical Engineering, and the news also mentions Separations Research Group members.
Richard B. Kaner Research Group
University of California, Los AngelesRichard B. Kaner · Distinguished Professor
How can advanced materials be designed for energy, electronics, and sustainability? The Kaner Research Group at UCLA focuses on the design, synthesis, and understanding of advanced materials. A major focus of the group is the development of advanced materials for electrochemical energy storage, particularly electrochemical capacitors. The group pioneered a materials design strategy for superhard solids based on combining high valence electron density with strong covalent bonding. The group has also advanced the chemistry and applications of conducting polymers, particularly polyaniline nanostructures.
Robert J. Hamers Research Group
University of Wisconsin-MadisonRobert J. Hamers · Professor of Chemistry, Steenbock Professor of Physical Science
How can surface chemistry be used to build better renewable energy devices while the environmental effects of nanomaterials are understood? Research in the Hamers group lies at the intersection of chemistry, materials science, and nanotechnology. The group develops new types of surface chemistry to create and improve devices for renewable energy. It also studies potential environmental and health effects associated with nanomaterials. The work targets devices such as solar cells, photocatalysts and batteries, with studies ranging from fundamental surface science to device behavior.
Robert Klie Research Group
University of Illinois ChicagoRobert Klie · Professor of Physics
What novel materials characterization approaches using electron microscopy does the Nanoscale Physics Group of Robert Klie develop for energy storage, conversion and quantum computing? Robert Klie is a Professor of Physics who specializes in Experimental Condensed Matter Physics. He directs the Nanoscale Physics Group at UIC and is the Academic Director of the Electron Microscopy Core Facilities. The group has focused on novel in-situ, atomic-resolution characterization methods for liquid-phase, cryo- and high-temperature measurements. He is also leading an effort at UIC in Functional and Regenerative Materials.
Robert Pilawa‑Podgurski Research Group
University of California, BerkeleyRobert Pilawa‑Podgurski · Professor, Division of Electrical Engineering (EECS)
How can high-density, high-efficiency power converters enable renewable energy and electrified transport applications while remaining experimentally demonstrable? The group designs and prototypes power electronics systems for photovoltaics, grid storage, electric vehicles, and data center power delivery. Researchers combine hardware prototype demonstrations with system-level integration to validate converter topology, thermal and efficiency tradeoffs, and control strategies. Projects include energy-harvesting and electric aircraft power systems using experimental demonstrations to prove feasibility. Work emphasizes experimental validation through building hardware to address technical challenges in energy conversion and integration.
Shane A. Snyder Research Group
Georgia Institute of TechnologyShane A. Snyder · Foundation Chair and Professor at Georgia Institute of Technology
How can water quality, treatment, and sustainability be improved? Shane A. Snyder is the José Domingo Pérez Foundation Chair and Professor at Georgia Institute of Technology. His research has resulted in over 300 published manuscripts. He is Editor-in-Chief for the American Chemical Society journal Environmental Science & Technology Water. He has been an advisor on water sustainability for numerous agencies and institutes around the world, including the US Environmental Protection Agency and the World Health Organization.
Shaowei Chen Research Group
University of California, Santa CruzShaowei Chen · Professor
What does research centered on electron transfer chemistry at the nanoscale involve at UC Santa Cruz? The research program of Shaowei Chen in the Chen group includes three separate research projects. The first project concerns the electron transfer properties of nanometer-sized functional particles and their organized assemblies. The second project examines the electrocatalytic activity of functional nanomaterials for fuel cell electrochemistry. The third project explores applications of nanoparticle materials as antimicrobial reagents.
Soft Materials Group
Drexel UniversityChristopher Li · Professor of Materials Science and Engineering
The way a polymer organizes itself can be as important as its chemical ingredients. Christopher Li studies how structure and morphology govern the properties of complex soft and hybrid materials. His group examines ordered polymer systems, including crystalline polymers, liquid-crystalline materials, and block copolymers, with interests in energy storage and biomedical applications. The research connects molecular organization with material performance, making it relevant to researchers drawn to polymer physics, soft matter, and the design of functional materials for practical engineering problems.
Stefan Bernhard Research Group
Carnegie Mellon UniversityStefan Bernhard · Professor
How can transition metal complexes convert light into electrochemical energy? The Bernhard lab investigates light-to-electrochemical energy conversions using synthetically tunable transition metal complexes as photosensitizers and catalysts. Its work targets processes with significant renewable energy applications, including water photolysis. The lab uses 3D printing and laser cutting to construct Raspberry Pi-managed automated reactors that monitor colorimetric changes in multi-well configurations. It also studies the photophysics of thousands of chromophores using a parallelized, high-throughput approach.
Thomas F. Fuller Research Group
Georgia Institute of TechnologyThomas F. Fuller · Professor and Thomas A. Solak Faculty Fellow
How can the lifetime of batteries and fuel cells be predicted and extended? Thomas Fuller is a Professor in the School of Chemical and Biomolecular Engineering. His research includes analysis and mathematical modeling of electrochemical systems for energy conversion and storage. He investigates the durability of batteries and fuel cells, particularly for transportation applications. He applies concentration solution theory to measure and correlate transport properties of electrolytes used in fuel cells and batteries.
Yat Li Research Group
University of California, Santa CruzYat Li · Professor
What does architecting materials and interfaces for electrochemical systems involve at UC Santa Cruz? Yat Li leads the Li Research Group, which focuses on architecting materials and interfaces for electrochemical systems. The research of the group integrates materials chemistry, interfacial science, and structural engineering. It aims to address fundamental challenges in energy conversion, energy storage, catalysis, and electrochemical separations. His summary of expertise lists nanomaterials synthesis and 3D printing, along with several other topics.
Yu Huang Research Group
University of California, Los AngelesYu Huang · Professor
How can the structure and assembly of nanoscale building blocks create new technological opportunities? Her research focuses on mechanistic understanding of nanoscale phenomena and on exploiting the unique properties of nanoscale materials for various applications. The work takes advantage of the unique roles of nanoscale surfaces and interfaces. The page says she is creating methodologies to apply the latest developments in nanoscale materials and nanotechnology. Applications named on the page include materials synthesis, catalysis, fuel cells, and biomedical and devices applications.
Showing 25–38 of 38 labs